CPE offers a complete engineering service, starting with laboratory and pilot testing, through to detailed engineering design, manufacture, and supervision of installation and commissioning.

Products and Services

Agitators

CPE designs and manufactures a range of agitators to meet the widest range of agitation requirements, precisely and economically. They are ideally suited for both batch and continuous applications such as:

• Blending of two or more miscible liquids.
• Complete motion of a liquid to maintain uniformity and prevent phase stratification.
• Promote heat exchange where temperature control is desired.
• Solids suspension and solids dissolving
• Contacting operations such as gas dispersion and immiscible liquid agitation.

Types of Agitators

Various agitation configurations can be offered including:

• Clamp-on portable with swivel or socket plate mount.
• Fixed mount top entering with inline or right-angled drive.
• Side entering, with shaft retract system, for seal replacement without emptying the tank contents.
• Bottom entering.
• Special purpose including dual speed counter rotating.

Agitators can be supplied with lip, hydraulic, stuffing box or mechanical seal options. Numerous wetted parts of construction are available including 316 Stainless Steel, Hastelloy, Titanium, Monel, rubber, plastic or special coatings.

Static Mixers

The Chemplant Inline Mixer is geometrically shaped to provide predictable, repeatable and rapid mixing results within a pipeline. The inline mixer will blend, disperse, react or shear two or more fluids within short lengths of piping. To achieve these results, the mixer relies partly or wholly on the principals of radial eddying, flow division, and shear reversal. These transport phenomena combine to eliminate concentration, velocity, and thermal gradients in a plug flow fashion without losses in back mixing.

The inline static mixer can be used for many applications

• Liquid-Liquid Blending
• Liquid-Liquid Dispersion
• Gas-Liquid Gas Blending
• Heat Transfer
• Thermal Homogenization

The static mixer can be supplied with removable, sanitary or special element designs. Injectors and sparge systems are optional, as are jacketed units for heating and cooling. Shell and tube designs are engineered for viscous heat transfer problems.

Static mixer are available in a wide range of materials including carbon steel, stainless steel, Monel, Hastelloy, PVC, FRP, ceramic, Teflon and a variety of other special alloys.

Vacuum Filters

Travelling Belt Filters suitable for continuous filtration of fast draining slurries.  Equipment is available in size flanges from 1m2 to 70 m2 filtration area.

Rotary Pan filters suitable for continuous filtration of rapid settling, free filtering solids and are designed for ease of installation and simple reliable operation.  Filter sizes range from 0.7m2 (1 metre diameter) to 64m2 (9.3 metre diameter). 

Rotary Drum Filters are available  in a variety of configurations with differing cake discharge mechanisms and can include the use of precoat to enhance filtrate clarity or assist with cake build-up.  Filtration areas range from about 1.0m2 to around 240 m2.

All vacuum  filtration equipment  is custom designed  for the process application and are available in a variety of construction materials to suit the operating conditions. Filters are available complete with  filter stations  to manage  filtrate and vacuum systems and can  include PLC controls if required.

Pressure Leaf Filters

Chemical Plant & Engineering, in partnership with AMA Filter Group, is able to design and supply a complete range of pressure leaf filters.

Products include:

• Horizontal retractable steel/bundle units ranging from 5m2 to 180 m2
• Vertical dry/wet cake discharge units ranging in size from 2m2 to 85m2
• Pulse Tube filters for fine product polishing
• Rotojet Filters in single and double conical and ‘V” sump configuration ranging in size from 3m2 to 200 m2

Filter Presses 

Chemical Plant & Engineering in partnership with Tefsa Spain, is able to design and supply plate filter presses and belt filter presses complete with ancillary equipment in a variety of product configurations.

Examples include:

• manual and semi-automatic filter presses with recessed or membrane plates, the dimensions of which range from 500 x 500mm to 1500 x 2000mm.
• fully automatic  filter presses with recessed or membrane plates  the dimensions of which range  from 630 x 630mm to  1500 x 1500 mm.
• belt filter presses with widths of 1200mm, 1700mm or 2200mm.
• polymer make-up and dosing units
• high pressure sludge feeding pumps (piston or membrane type) specially designed to allow filter presses to produce cake with a high dry solids content.

Powder Mixers

Chemical Plant & Engineering has a number of equipment configurations for the mixing of dry powders.

We  offer  the  FM Mixer which  provides  a  homogenous  blend  regardless  of  particle  size  and  density  and eliminates  segregation  during mixing, unnecessary  generation  of  heat  and  can  also  provide  capability  to adequately disperse liquids.  Size range from 30 litre to 6000 litre bowl capacities.

In  conjunction  with  A  &  J  Mixing  in  Canada  we  offer  the  Phlaeur  Mixer  which  offers  similar  mixing performance  to  the  FM  Mixer,  but  is  available  in  single  rotor  as  well  as  double  rotor  configuration.    In
addition,  the addition of  the shearmaking accessory creates  the ability  to quickly and completely break up agglomerates or totally disperse difficult additives

GL Nozzle

The GL nozzle is a venturi based system which is capable of dramatic improvement in oxygen transfer due to optimised internal geometry and wear resistant internal liners 

The  units  are  sized  based  upon  process  data  and  start  at  40 mm  diameter  then  generally  increase  in standard pipe schedule sizes. 

Material of construction for the outer pipe are generally CS or SS and internal liners are Silicon Carbide or Aluminium Oxide Ceramic.

Contacts

A.C.N. 006 967 988      A.B.N. 19 006 967 988
A member of the CEM International Group of Companies
 
63-65 MAFFRA ST, COOLAROO, VICTORIA 3048.
Postal address: P.O. Box 160, DALLAS, Victoria 3047, Australia
 
Telephone No.: (03) 9309 4822
Facsimile No.:  (03) 9309 0069
Email cpe@cem-int.com.au
Web: http://www.cem-int.com.au/ourbusinesses/cpe/