Friday, 3 July 2020
Slew and Swing Bearings Need Grease in Optimal Condition
Austmine Limited
/ Categories: Articles & Editorials

Slew and Swing Bearings Need Grease in Optimal Condition

To ensure efficient, trouble-free operation of vital components such as slew and swing bearings, it is a must to have grease in optimal condition and lubrication specialists Techenomics ensures this is the case.

Any issues with grease can be recognised in advance with a good grease analysis program, according to Sahar Nazari, the supervisor at the Techenomics Australia laboratory in Newcastle, the traditional hub of coal mining and transport in Australia.

She says slew and swing bearings should be lubricated at regular intervals with heavy-duty, extreme-pressure grease. "Generally, slowly-rotating equipment or oscillating applications such as backhoes, excavators and cranes should be re-lubricated about every 100 hours of operation. "More frequent lubrication may be needed on equipment that moves rapidly or rotates continuously, such as trenchers and boring machines."

Tribological issues pertaining to grease are not easy to detect but Techenomics'  independent, specialised sampling, testing, analysis, reporting and advisory services makes this possible.

When combined, these factors provide equipment operators with the ability to predict maintenance issues before they arise and keep on top of grease management.

Techenomics CEO Chris Adsett says this is particularly important in the coal industry where slew and swing bearings are vital and where coal dust exacerbates issues caused by ineffective grease management practices.

He says lubricating greases are semi-solid materials used in many applications, including bearings, gears and rail operations.

"Lubrication of metal components with grease reduces friction, which leads to less wear and heat transfer in mechanical systems. "The sticky and adhesive properties of grease also enhance sealing to prevent water ingress and prevent contaminant particles entering a system to reach the lubricated contacts. "Once the rubber seals are compromised then contamination will accelerate wear and corrosion."

Chris Adsett says Techenomics comprehensive tests and analysis by trained experts in accredited laboratories using relevant software allows the company to effectively test grease samples. "Over time we outline trends which can be used by equipment operators to predict maintenance issues and prevent them arising before they lead to costly downtime and loss of productivity," he adds.

For more information about Techenomics contact: Chris Adsett,; in Indonesia Teguh,; in Singapore Siti,, in Mongolia Tumee,, or in Australia Steven Adamthwaite, and Michael Noncic,



Previous Article TXM Lean Case Study Video – Hazchem Safety
Next Article MICROMINE on-board as major sponsor at the 2018 Austmine Innovation Roadshow

Theme picker

Austmine Programs

All Programs

Austmine Publications

All Publications


SUBSCRIBE to our newsletter





WonderWebs.comTerms|Privacy|Copyright © 2020 Austmine | Mining Equipment, Technology and Services (METS) Sector
Back To Top