Tuesday, 7 July 2020
Industry Study Investigates Technology for Upgrading Ore
Austmine Limited
/ Categories: Articles & Editorials

Industry Study Investigates Technology for Upgrading Ore

This was originally published by CRC ORE.

A collaborative study on the integration of screening and particle sorting techniques is set to deliver benefits across the resources sector.

The Integrated Screening and Particle Sorting Collaborative (ISPS) Study, with Australian mining companies BHPNorton Gold Fields and Saracen, aims to develop a robust and scientifically rigorous framework for collecting, testing and reporting results for integrated screening and particle sorting techniques in a variety of ore domains.

Supported by the Minerals Research Institute of Western Australia (MRIWA), the study began in August 2019. It is currently underway at BHP’s Cliffs mineNorton Gold Fields’ Paddington Gold site and Saracen’s Carosue Dam operation in Western Australia and it is expected the study will further expand during its 15-month tenure to include an additional two sites.

An Industry Opportunity

CRC ORE ISPS Study Program Manager, and Discipline Lead - Metallurgical Engineering at Curtin University’s Western Australian School of Mines, Dr Laurence Dyer said the opportunity existed to use particle sorting to upgrade ores.

“Trials have recently been conducted at several gold mining operations in the Goldfields region of Western Australia,” Dr Dyer said.

“What commonly fails to be taken into consideration is the benefit of first assessing the natural deportment of metal to a size fraction through grade-by-size screening test work, prior to undertaking particle sorting test work.”

“Missing this step has two impacts. Firstly, there is a risk that particle sorting test results will be misinterpreted as being representative of the full sample without considering the mass balance impact of high-grade material that might have been lost in the fine fraction. This fine fraction will not be detected through the particle sort 

“Secondly, the opportunity may exist to upgrade feed first through determining if there is a concentration of high grade to the fine (or coarse) fraction which can be separated through screening. Undertaking screening in the preparation stage of the particle sorting process will enable analysis and separation of the fine or coarse fractions of a rock mass.”

Dr Dyer said the study outcome would be a blueprint for understanding the opportunity for upgrading ore feed including an assessment of operational impacts, economic valuation and implementation approaches.

“BHP, Norton Gold Fields and Saracen will benefit from insights and improvements generated from other sites,” Dr Dyer said.

“CRC ORE will benefit from developing a broader understanding of the application and opportunity for applying particle sorting on a range of deposit types and integrating this with natural deportment grade-by-size screening opportunities to maximise value for mining operations.”

ISPS Value to Industry

The ISPS study forms part of the CRC ORE Grade Engineering program, which is focused on extracting metal more efficiently by separating ore 
from waste before it enters comminution.

Current industry perception is that declining feed grade is an unavoidable consequence of ore deposit geology and mass mining technologies for increasingly mature mining operations.

In typical crush-grind-float operations, value recovery only takes place at ~100-micron particle size involving 3-4 orders of magnitude size reduction compared to run of mine feed. For increasingly low-grade deposits the cost of energy and capital intensity required to process and reject worthless material at micron scale drives poor productivity. An alternative is to deploy a range of coarse rejection technologies.

Grade Engineering is an integrated approach to coarse rejection that matches a suite of separation technologies to ore specific characteristics and compares the net value of rejecting low value components in current feed streams to existing mine plans as part of a system-view.

Dr Dyer said the Grade Engineering program and the ISPS study would be conducted through CRC ORE’s Kalgoorlie-Boulder Mining Innovation Hub and Curtin University’s Western Australian School of Mines.

“Particle sorting is an important lever of Grade Engineering,” Dr Dyer said.

“Through this project CRC ORE is looking to develop a better understanding of the value of particle sorting to upgrade mill feed, particularly when combined with grade-by-size screening.”

More information on the Kalgoorlie-Boulder Mining Innovation Hub can be found at kalhub.com

Print
395
Previous Article Online Integrated Strategic Planning Seminar
Return
Next Article Webinar Recording: Looking Ahead for Mining and METS

Theme picker

Austmine Programs

All Programs

Austmine Publications

All Publications

GET SOCIAL

SUBSCRIBE to our newsletter

Loading

Austmine

 

OZ METS Hub

WonderWebs.comTerms|Privacy|Copyright © 2020 Austmine | Mining Equipment, Technology and Services (METS) Sector
Back To Top